Hybrid Glass Screen Protector 3mk Flexible Glass 7H Screen Protector For Sam

Offer's description

Flexible Glass 3mk Hybrid Glass Product Description + Highlights

Product Highlights: Brand: 3mk Series: Flexible Glass Product Type: Hybrid Glass Dedicated to: Samsung Galaxy S23 Glass dimensions: 66 x 141 mm (+/- 2mm) Device dimensions: 70.90 x 146.30 mm Thickness: only 0.3 mm Surface hardness: 7H Technology: FIT IN 2.5x increases screen durability Precise fit Protects against scratches Resistant to cracking
Strong protection Original 3mk® Glass from the Flexible Glass series is a high-quality screen protector for our smartphone. It is characterized by flexibility and at the same time a small thickness of only 0.3mm. Flexible 2.5x glass strengthens the strength of the screen, provides the best protection against scratches and damage - the hardness of the coating is 7H. Such high hardness, exceeding the protective films, was achieved by enriching the structure with additional ceramic coatings.
Hybrid construction 3mk glass has been improved with special ceramic coatings, thanks to which high hardness of the glass has been achieved, exceeding protective films. Protective glass for the screen, combining hybrid solutions with high-quality coatings, will allow us to safely use the smartphone anywhere. The structure of 3mk glass is resistant to breakage, which is especially useful during unwanted falls.
The manufacturer designs its products on real devices, which allows to obtain a perfect shape taking into account all buttons, speakers and cameras - so as to perfectly match the product to the device and maintain full sensitivity to touch. 3mk® products adhere thanks to Inviscid-Sil, a non-sticky silicone that allows multiple installations. This makes it very easy to apply. 3mk FlexibleGlass gives you a tactile experience, closest to using the screen itself. It's also easier to remove fingerprints from the screen.
Set contains: 1 pc. FlexibleGlass™ for the screen Fit-In™ stickers - for easy positioning of the glass Dust-Fix™ leaves - to help remove dust particles Anti-Bubble Card™ - to remove air bubbles CleaningSet - to clean the screen
Installation instructions - step by step 1 . Before you start the installation, lock the screen or turn off the device so that no one distracts you. 2. Clean the screen with a wet cloth first, then a dry cloth. 3. Try the glass with the holes to the speaker and camera. 4. Peel off the backing from the Fit-In stickers and stick the glass to the device's casing. 5. Using a Dust-Fix sheet, slowly remove the backing and clean the screen again. 6. Place the glass on a motion screen similar to closing a door and wait for the glass to adhere on its own. 7. If there are air bubbles left, use a dry cloth and Anti-Bubble Card to remove them. 8. Remove the protective layer.
Remember! Due to the curves of the screen, the glass/foil does not cover its entire surface - it is cut only to the flat part of the screen. This solution means that it can be used in combination with a case. Due to the variety of edge milling of the displays, a slight air halo may form around the screen after the glass is installed. This is a natural situation and depends on the screen itself.